Stanley 1913 Drinkware & Gear | Bottles, Tumblers, Growlers ...

Wicked for Good Quencher 20oz Tumbler: Care and Use Tips

Wicked for Good Quencher 20oz Tumbler: Care and Use Tips

By Stanley 1913 Drinkware & Gear | Bottles, Tumblers, Growlers ... | Published: 2026-11-03

Category: Vejledninger

Keep your Wicked for Good Quencher 20oz tumbler sipping clean and cold. Follow these simple steps for daily use, lid care, and washing the FlowState H2.0.

Quick answer

Rinse your Wicked for Good Quencher 20oz tumbler after every use, hand-wash the lid and straw, and never put the decorated body in the dishwasher. Follow the steps below to keep the FlowState lid working smoothly and the iridescent finish looking its best.

Why the lid needs more attention than the tumbler body

The FlowState 3-position lid has a reusable straw, a silicone cover, and moving parts that collect drink residue. The tumbler body is double-wall vacuum insulated, so it only needs a quick rinse and air-dry. The lid is where odors and buildup start, so give it a few extra seconds of care each day.

The trade-off of a special finish

The Wicked for Good design uses iridescent ombres and shimmer, which can be sensitive to heat and harsh detergents. Hand-washing the body protects the decoration, but it takes longer than loading a dishwasher. If you are short on time, at least rinse and dry the tumbler immediately after use.

Step-by-step care for your Wicked for Good Quencher 20oz

  1. Rinse immediately after each use: Empty any leftover drink and rinse the tumbler body and lid with warm water. Do not let sugary or dairy drinks sit inside, as they can cling to the lid seals and cause odors. A quick rinse now prevents a bigger cleaning job later.
  2. Disassemble the FlowState lid: Remove the straw and rotate the silicone cover to the open position. Gently pull the lid apart only as far as the design allows; do not force any parts. Check the straw for residue and rinse it thoroughly inside and out. If a part does not move easily, stop and rinse instead of pulling harder.
  3. Hand-wash the lid and straw: Wash the lid and straw in warm, soapy water using a soft bottle brush. Pay attention to the sip opening and the area around the silicone cover. Rinse well so no soap residue remains. Skip the dishwasher for the lid to avoid warping or trapping water in small parts.
  4. Wipe the tumbler body by hand: Wipe the outside of the tumbler with a soft, damp cloth and mild soap. Do not scrub the iridescent finish with abrasive pads or brushes. Rinse the inside with warm water and let it air-dry upside down. Avoid soaking the body for long periods, which can dull the shimmer over time.
  5. Air-dry all parts completely: Place the tumbler body upside down on a drying rack and leave the lid and straw separate to air-dry. Make sure the lid's moving parts are fully dry before reassembling to prevent mildew. If you smell mustiness, rewash the lid before using it again.
  6. Reassemble and test the lid: Once dry, reattach the straw and rotate the silicone cover through all three positions. Check that the lid sits flush and the straw is secure. If the lid feels stiff, rinse it with warm water before forcing it. A properly seated lid prevents leaks in your bag.
  7. Deep-clean weekly: Once a week, soak the lid and straw in a mixture of warm water and a small amount of baking soda for 15 minutes, then scrub and rinse. This helps remove lingering tastes and odors from coffee or flavored drinks. Do not soak the tumbler body in baking soda; clean it separately with mild soap.

Product facts

Shop Related Products

The Wicked for Good Quencher® H2.0 FlowStateTM Tumbler | 20 OZ

The Wicked for Good Quencher® H2.0 FlowStateTM Tumbler | 20 OZ

$22.40 $35.00

Shop Now